Halls ICON 8 8x14 Greenhouse Base - Galvanised Steel HR01365

Built to support the larger footprint and increased weight of the Halls ICON 8 8x14 greenhouse, this model-specific galvanised steel base provides the rigid, level platform required for accurate installation and long-term structural reliability.

The Halls ICON 8 8x14 Greenhouse Base is designed specifically to support one of the largest greenhouses in the ICON range. With wider spans, longer glazing runs, and significantly more glass weight, a greenhouse of this size places far greater demands on its foundation than smaller models.

On an 8x14 structure, even small inaccuracies in the base can translate into door misalignment, glazing stress, and gradual frame distortion. This model-matched galvanised steel base provides a rigid, load-spreading perimeter that keeps the entire greenhouse square, level, and properly supported from installation onward.

Manufactured from corrosion-resistant galvanised steel, the base distributes the weight of the greenhouse evenly across the ground, reducing the risk of settlement or twist as conditions change. This is particularly important for larger greenhouses, where the combined weight of glazing, crops, and snow or wind load can place sustained pressure on the frame if the foundation is not fully stable.

The base can be installed on prepared soil, paving slabs, concrete, or patio surfaces, provided the surface is flat and level. Integrated anchoring points allow the frame to be fixed or partially set below ground, improving resistance to wind uplift and helping lock the structure in place.

Halls ICON 8 8x14 greenhouse base features

• Purpose-engineered base frame for the Halls ICON 8 8x14 greenhouse
• Heavy-duty galvanised steel construction for long-term outdoor use
• Rigid perimeter design supports larger spans and heavier glazing loads
• Helps prevent twist, movement, and frame distortion over time
• Integrated anchoring points for fixing or setting below ground
• Suitable for soil, paving slabs, concrete, or patio installations
• Designed to integrate precisely with the ICON greenhouse system
• Supports smooth door operation and consistent glazing alignment

Is the Halls ICON 8 8x14 base right for you?

This base is intended for installations of the Halls ICON 8 8x14 greenhouse where accurate alignment, load distribution, and long-term structural stability are required. As an 8x14 greenhouse carries greater glazing weight and wider spans, a galvanised steel base plinth provides the rigid, level foundation needed to maintain correct door operation, glazing fit, and frame geometry over time. For sites where a purpose-engineered foundation is preferred over a generic base or ground fixings, this 8x14 greenhouse base offers the most reliable and consistent installation platform.

Supplied only with a new Halls Icon greenhouse and not sold separately.